Manuscripts

Recent Papers

Prediction of Axial Load Carrying Capacity of LWC INFILLED CFST Columns- ANOVA Approach

Concrete filled steel tabular columns have gained immense importance in recent decades due to numerous structural benefits especially in developed countries like china, Japan, U.S.A, Britain. Composite circular steel tubes Columns - with light weight concrete as infill for two different grades say M20 and M30 are tested for ultimate load capacity by previous researchers (both at international and national) in addition to results obtained by previous post-graduate students of Ghousia Collage of Engineering, R & D center, Civil department have been verified by ANOVA approach is presented in this paper. Steel tubes are tested for the different combination of Length, Thickness & Diameter with the help of Taguchi’s L9 (Latin squares) -Orthogonal array in order to save time and cost of experimentation and also to determines the effect of each parameter. This study further presents a numerical investigation into the behavior of concrete filled tabular columns using three-dimensional nonlinear finite element software ABAQUS 6.10.1 is carried out in this paper. The analytical results obtained are compared with the numerical results obtained from Abaqus 6.10.1. For this purpose a comparison between design codes Eurocode -4 and AISC-LRFD has been made in evaluating the axial compressive strength of concrete filled tabular columns. The obtained results were analyzed with the help of Signal/Noise (S/N) Ratio, Main Effects Plot & Analysis of variance (ANOVA) using Mini Tab V16. Regression equations are developed for all two grades of infills separately. This paper focuses on modeling of Infilled concrete filled steel tube (CFST) column under axial loading and economical aspects.

Published by: Karthik A R, Dr. N. S. Kumar

Author: Karthik A R

Paper ID: V3I2-1558

Paper Status: published

Published: April 22, 2017

Full Details

Automation of Multiproduct Herbal Juice Manufacturing Plant

In the market there are more types of herbal products are available which are used as medicine. There is a Neem is one of the most useful medicinal plants. There are many other plants also use as medicine like Aloe Vera. Neem plant is the most eco-friendly plant for a human being from medical or/and hygienic point of view, And also for aggro point of view. Each part of Neem tree has medicinal property. Juice of Neem leaves free from chemicals useful for exporting the products to countries that are very cautious about residual pesticides. Also, the extracted residue can be used as organic fertilizer, thus increasing aggro output. Automation is useful for reducing human effort in industrial working. This gives more accurate results with high quality. With help of automation, the only single worker can handle the manufacturing plant. We used ARM microcontroller based automation system for multiproduct herbal manufacturing plant system is basically embedded system. The main objective of this system is to automate the process for the efficient functioning of the plant. In this automation project, we control solenoid valves and relays means motor, pump with the help of ARM7.

Published by: Girish Sunil Pharande, Rohit M. Kamble, Rupali M. Gore, Chinmay A. Dalavi, Rohit R. Yadav, Rahul J. Gade, Nitin B. Gurav, Prof. S. S Dhende, Missing

Author: Girish Sunil Pharande

Paper ID: V3I2-1548

Paper Status: published

Published: April 22, 2017

Full Details

Validation of Ultimate Axial Load Carrying Capacity on Composite Steel Tube Column In filled With SCC by Using Nx-Nastron

This Research focuses on validation of Ultimate axial load carrying capacity of CFST column filled with Light weight concrete and self-compacting concrete using NASTRON. Three-dimensional nonlinear finite element modal is developed to study the force transfer effect between concrete and hollow steel tube. Model is developed for understanding the complex behavior of conventional composite circular steel tube and self-compacting concrete infilled tube with various grades and different diameters (D), thickness (t) and length (l). Using hyper mesh, the model is meshed and model is used in NASTRON finite element software. The result obtained for M20, M30 Grades of SCC concrete is compared with Analytical Codal relations along with standard results obtained from previous Researchers.

Published by: Madhu B. N, Dr. N. S Kumar

Author: Madhu B. N

Paper ID: V3I2-1545

Paper Status: published

Published: April 21, 2017

Full Details

Studies on Road Accidents on National Highway No.6

Globalization has impacted many developing countries across the world. India is one such country, which benefited the most. Increased, economic activity raised the consumption levels of the people across the country. This created scope for increase in travel and transportation. The increase in the vehicles since last 10 years has put lot of pressure on the existing roads and ultimately resulting in road accidents. It is estimated that since 2001 there is an increase of 202 percent of two wheeler and 286 percent of four wheeler vehicles with no road expansion. Motor vehicle crashes are a common cause of death, disability and demand for emergency medical care. Globally, more than 1 million people die each year from traffic crashes and about 20–50 million are injured or permanently disabled. There has been increasing trend in road accidents in Jalgaon over a few years. GIS helps in locating the accident hotspots and also in analyzing the trend of road accidents in Jalgaon.

Published by: Dhiraj Borole, Jyoti R. Mali, Vishal Patil, Kiran Pachpole, Bhushan Pandhare, Rupesh Borole

Author: Dhiraj Borole

Paper ID: V3I2-1512

Paper Status: published

Published: April 21, 2017

Full Details

Institute Administration Automation and Student Database Management System

The main objective of this project is to develop a method to use a personal computer to automate the administration procedures of an educational institute and effectively and efficiently manage students' database using a Web-based application. The program will enable the college staff to enter students’ information in the system which will generate a unique ID for each student at the time of admission. The staff will be able to manage the students' marks, fee information, personal information and all other academic information which is usually done manually. This ID will be used to reference the student in all the functions of this application. Since the system is automated, there is hardly any room left for human error, thus minimizing any potential complications in entering information and maintaining records. So, we propose a software application that will have a simple interface that would be easily understandable to everyone with minimal cost and can be used in various education institutions for automating the administration work and efficiently managing the student database with minimal error possibility.

Published by: Aishwarya Tamboli, Priti Shinde, Pravin Pariskar, Manisha Sonawane, Chinmay Anaokar

Author: Aishwarya Tamboli

Paper ID: V3I2-1563

Paper Status: published

Published: April 21, 2017

Full Details

Various Energy Efficient Schemes in WSNS: A Survey

Wireless Sensor Networks (WSNs) can be well-defined as one which can configure itself. It is infrastructure-less networks deployed to observe physical or else ecological surroundings, for instance, hotness, sound, tremors, pressure or impurities. All the information is sensed by the sensors which supportively pass the data through the network to a sink where the data can be perceived and investigated. Since these nodes are deployed in unhuman conditions so preserving their batteries is very challenging task. Clustering, described by LEACH protocol, is one of the techniques which helps in increasing their lifetime. This paper describes recent studies about the clustering approaches that are used to preserve the batteries of sensor nodes to make them work for the longer duration of time.

Published by: Rajveer Kaur Khosa, Pawan Luthra, Gagan Luthra

Author: Rajveer Kaur Khosa

Paper ID: V3I2-1534

Paper Status: published

Published: April 20, 2017

Full Details
Request a Call
If someone in your research area is available then we will connect you both or our counsellor will get in touch with you.

    [honeypot honeypot-378]

    X
    Journal's Support Form
    For any query, please fill up the short form below. Try to explain your query in detail so that our counsellor can guide you. All fields are mandatory.

      X
       Enquiry Form
      Contact Board Member

        Member Name

        [honeypot honeypot-527]

        X
        Contact Editorial Board

          X

            [honeypot honeypot-310]

            X