Manuscripts

Recent Papers

Review Paper

Optimization of turning process parameters for surface roughness in dry and wet condition of AISI 1045 steel using Taguchi method

The main purpose of today’s manufacturing industries is to produce low cost, high-quality products in short time. They mainly focused on achieving high quality, in term of part accuracy, surface finish, high production rate etc. So, the selection of optimal cutting parameters is a very important issue for every machining process in order to reduce the machining costs and increase the quality of machining products. In this paper, the cutting of AISI 1045 steel material under the wet and dry condition is carried out using CNC lathe machine. Taguchi method is used to formulate the experimental layout. The effect of cutting condition (spindle speed, feed rate and depth of cut) on surface roughness were studied and analyzed. The CNC turning machine is used to conduct experiments based on the Taguchi design of experiments (DOE) with the orthogonal L9 array. Optimal cutting parameters for each performance measure were obtained employing Taguchi techniques. The orthogonal array, signal to noise ratio and analysis of variance were employed to find minimum surface roughness. Optimum results are finally verified with the help of confirmation experiments.

Published by: Bharat Jhariya, Arun Patel

Author: Bharat Jhariya

Paper ID: V4I3-1265

Paper Status: published

Published: May 7, 2018

Full Details
Review Paper

A review of holographic optical elements in solar concentrator applications

Photovoltaic cells are used to convert sunlight into electricity; the commercial photovoltaic cells made up of silicon but the main drawback of the solar cells is low conversion efficiency. In order to improve conversion efficiency generally mirrors and lens system is used as conventional solar concentrators, in the fact they have some drawback of bulky in nature, high installation cost, need the tracking system to face the sun, and also concentrating both light and heat on the solar cell. To overcome these problems holographic solar concentrators were used as solar concentrators. Holography is one of the very promising technologies to produce solar concentrators; mostly volume phase holograms are used as holographic solar concentrators. The holographic solar concentrators have some major advantages of lightweight, cool light concentration, and selective wavelength concentrations for wavelength dependable solar cells. In this paper, a brief review and basic study of holographic solar concentrators have been discussed. The key contributions of each work examined here and different technologies also discussed. This review is useful to study about basic foundations and create new ideas for future research work.

Published by: H. R. Pratheep, A. Balamurugan

Author: H. R. Pratheep

Paper ID: V4I3-1240

Paper Status: published

Published: May 7, 2018

Full Details
Review Paper

Gait analysis: Approaches and applications

Gait analysis is systematic quantification and evaluation of human walking. It has applications in the field of clinical sciences, video surveillance, rehabilitation therapies, etc. Various state-of-the-science, as well as traditional approaches, have been used for evaluating the gait cycle. This narrative review provides a brief understanding of all such approaches and methods used by scientists and clinicians in India. State-of-the-science approaches include marker based systems, wearable or non-wearable, sensors system, support vector machine, etc. Whereas traditional approaches include observational analysis, videography, etc. 3D gait analysis provides reliable data, however, is currently in limited use due to high instrumentation and maintenance costs involved. Indian scientific community can benefit for traditional approaches which are low-cost, reliable, and can be easy to implement in all sort of set-ups with relative ease.

Published by: Pranav Shah, Abhinav Gorle, Durgesh Reddiyar, Dr. Sanjay Pardeshi, Sandeep Mane

Author: Pranav Shah

Paper ID: V4I3-1159

Paper Status: published

Published: May 7, 2018

Full Details
Review Paper

Digital Dentistry

To date, there has been various software used in the field of dentistry as a whole, be it in case history, imaging and in clinical practice management. This article classifies the different types of dental software and gives an overview of the different software available and used in dentistry across the world with a brief note on its history. We highlight on the different dental software available for various imaging modalities, practice management, easy diagnostics in the field of dentistry. It also gives an insight into the future with different kinds of dental software used in the field of dentistry.

Published by: Tim Peter, Deepthi Cherian

Author: Tim Peter

Paper ID: V4I2-2203

Paper Status: published

Published: May 7, 2018

Full Details
Case Study

The structural design of the multistorey building

The rapid growth in the rate of construction of multi-storey blocks has been an important feature of the building industry over the past fifteen years. Much of this construction has occurred in areas underlain by the cyclothemic rocks of the Coal Measures. The anisotropic properties of this sequence lead to rapid horizontal and vertical variations in foundation conditions, which must be assessed in selecting the type and depth of foundation and the allowable bearing pressure. Special problems occur in areas which have been undermined by shallow mineral workings. Such sites require special investigations, careful evaluation of the site conditions and the design of appropriate foundations. The desirable approach in many instances is to plan developments on a large scale so that the greatest economic advantage may be taken of the best site conditions. In order to compete in the ever-growing competent market, it is very important for a structural engineer to save time. as a sequel to this, an attempt is made to analyze and design a Multistoried building by using a software package stand pro. For analyzing a multi-storied building one has to consider all the possible loadings and see that the structure is safe against all possible loading conditions. There are several methods for analysis of different frames like Kani's method, cantilever method, portal method, Matrix method.

Published by: CH Sandeep Reddy, B Sagar, A Sai Kiran, A Naresh, S Sravan Reddy

Author: CH Sandeep Reddy

Paper ID: V4I2-1904

Paper Status: published

Published: May 7, 2018

Full Details
Research Paper

Feasibility study of on-street parking for suitable solution on existing parking issues

The current study is a fieldwork which involves parking study along with parking characteristics for better efficiency of road traffic. For the purpose of the survey, the methodology was developed, which in short terms, is as follows: for each parking place by pre-defined parking area can be determined the nature, frequency, and duration of use. During the survey, one or more counters for several times, consistent and walk a predetermined route on foot. Pimpri Chinchwad is developing municipal corporation. For the purpose of future expansion of the city and betterment of the township the counter recognize site of the parking place on a map and record the vehicular count over the period of the time. If necessary, you can distinguish the category of vehicle parking (free, paid per hour, service subscription). The methodology is appropriate to collect the category of use of the parking place, use of parking spaces on the street, residence time, total number of vehicles in one area during the measurement, localization of parking capacity and relevance of the parking category. The parking provided to the roads in Pimpri Chinchwad area determined whether it is Parallel, Perpendicular, or angle parking (i.e. 30°, 45°, 60°). The cost analysis for the area which is available for the parking is determined and accordingly, the cost is determined for Two Wheeler, Car, Auto, Truck, NMV, etc.

Published by: Sachin Bhure, Mohit Bache, Saurabh Bedmutha, Nilesh Pawar, Pranesh shrivat, S. S. Motegaonkar

Author: Sachin Bhure

Paper ID: V4I3-1232

Paper Status: published

Published: May 5, 2018

Full Details
Request a Call
If someone in your research area is available then we will connect you both or our counsellor will get in touch with you.

    [honeypot honeypot-378]

    X
    Journal's Support Form
    For any query, please fill up the short form below. Try to explain your query in detail so that our counsellor can guide you. All fields are mandatory.

      X
       Enquiry Form
      Contact Board Member

        Member Name

        [honeypot honeypot-527]

        X
        Contact Editorial Board

          X

            [honeypot honeypot-310]

            X