This paper is published in Volume-4, Issue-3, 2018
Area
Civil Engineering
Author
Sandeep, Nitin Thakur
Org/Univ
Om Institute of Technology and Management, Hisar, Haryana, India
Pub. Date
30 May, 2018
Paper ID
V4I3-1660
Publisher
Keywords
Quarry dust, Brick, Furnace waste.

Citationsacebook

IEEE
Sandeep, Nitin Thakur. The study of characteristic behaviour of quarry and furnace waste lightweight bricks, International Journal of Advance Research, Ideas and Innovations in Technology, www.IJARIIT.com.

APA
Sandeep, Nitin Thakur (2018). The study of characteristic behaviour of quarry and furnace waste lightweight bricks. International Journal of Advance Research, Ideas and Innovations in Technology, 4(3) www.IJARIIT.com.

MLA
Sandeep, Nitin Thakur. "The study of characteristic behaviour of quarry and furnace waste lightweight bricks." International Journal of Advance Research, Ideas and Innovations in Technology 4.3 (2018). www.IJARIIT.com.

Abstract

Quarry Dust and the crushed brick as alternative aggregates for concrete production for low cost housing since it is clear that the rising cost of concrete materials coupled with environmental degradation has impaired the construction industry. The following tests were carried out to determine the physical properties of these materials; density tests, silt content, water absorption, sieve analysis, specific gravity, flakiness index and aggregate crushing value. The research was conducted by testing concrete cylinder and cubes specimens at ages of 7, 14 and 28days concrete with concrete mix ratios 1:1.5:3 with a target strength of 25N/mm2 and 1:2:4 with a target strength of 20N/mm2. Samples of concrete specimens were made using varying contents of quarry dust and laterite as fine aggregate. India is a developing contrary due to there is a huge need of infrastructure that is why construction is very important. In the construction the main material his problem we are making brick using Furnace Waste. This brick is stronger economical and effective than the clay brick. This process also helps in converting industrial waste material into quality building material. In this study, the fine and coarse aggregates were completely replaced by Furnace Waste aggregates in Furnace Waste concrete. 1) A mix design was done for M20 grade of concrete by IS method. Ordinary Portland cement of 43 grade was 2) Selected and Furnace Waste aggregates were prepared by mixing Furnace Waste with cement and water. The properties of Furnace Waste. In the present study we are making three types of Furnace Waste bricks in the different percentage of cement such as 3%, 5% and without cement. And after making these bricks various tests were performed such as compressive strength test, water absorption test, efflorescence, weight test, structural test and cost analysis and these results were compared with conventional bricks results.