Manuscripts

Recent Papers

Review Paper

Literature survey on the elimination of effect on power transformers by using differential protection

The word “Elimination” is generally used to describe the whole concept of removing or controlling the error value to the stationary value of the power system. In this paper, an effort is made in the direction of development in the protection of power transformers. Protection of all types of transformer in the power system is very important for normal operation of the power system. Among the various operation of power transformer differential operation is a very common method. In this paper, we review the concept of power transformer differential protection then analyze the problem of transformer differential protection to find the solution. We then analyzed the different types of fault for study.

Published by: Kaustubh R. Sonar, Chetan M. Bobade

Author: Kaustubh R. Sonar

Paper ID: V7I2-1381

Paper Status: published

Published: April 15, 2021

Full Details
Research Paper

Static structural analysis of a water sprinkler using Ansys workbench

This paper contains a brief analysis of a mechanical component, which is used in almost all sorts of construction businesses, viz. “water sprinkler” in Fire Sprinkler System. The paper highlights changes observed in the results of the component, after analyzed with different meshing viz. linear-ordered tetrahedron; Quadratic-order tetrahedron; and Auto meshing provided by ANSYS workbench. The concentration graph is provided for visual analysis of critical portions (suggested to refer to the values instead). The result specifies the most appropriate meshing in order to obtain precise static structural analysis in efficient time.

Published by: Shravan Sanjay Pardeshi

Author: Shravan Sanjay Pardeshi

Paper ID: V7I2-1379

Paper Status: published

Published: April 15, 2021

Full Details
Research Paper

Analysis of hub and knuckle of SAE Baja electric vehicle

The Steering Knuckle component is the most important part of the vehicle which is connected to the front wheel with the help of a suspension system, wheel hub, and these are also connected to the steering system and brake to the chassis. The Steering Knuckle component provides motion to desired directions with the help of the steering system. It undergoes various types of varying loads under different conditions. In the Automobile industry efficiency and lightweight are the two main demands for the vehicle because the lighter steering knuckle resulting greater power and less vibration because of inertia is less. In this paper, we have done a static analysis of the steering knuckle component. Design, analyze, manufacture and test a wheel hub for an All-Terrain Vehicle (ATV). Using Finite Element Analysis as a method for reduction of cost in terms of material and manufacturing, Based on the outputs obtained from the previous design, new practical designs were generated and FE analysis was carried out for the optimized design to verify the strength of the hub. This optimized material resulted in a weight saving of the wheel hub without affecting the functional requirement. In this paper, we have done a static analysis of the hub of an ATV

Published by: Sanket Sabale, Pranav Solanki

Author: Sanket Sabale

Paper ID: V7I2-1375

Paper Status: published

Published: April 15, 2021

Full Details
Research Paper

Planning and scheduling for multi-story building using M.S project

Every one of us is a manager of projects of our own life. From an employee to financial analyst, from banker to doctor, from engineer to administrator, from a teacher to a student, we all work on different tasks with deadlines. For managing the events or activity, there is computer-based software which is particularly design for the planning and secluding. Software like M.S Excel, M.S Project, and Primavera. This thesis is carried out for the planning and scheduling of the M.S project. To know that this type of software is easy and efficient than manual methods. This software is basically based on manual methods but it is less time-consuming and precise than manual methods. In this thesis construction, site planning and scheduling should be generated. The site name is Indraprastha greens it is a multistorey building project of 10 blocks of 7 story. Each story has 4 flats, there are two types of flats each flat has 5 blocks. The project is constructed by a DEEP GROUP OF COMPANYS. In this thesis, E-block is select for the research of planning and scheduling in the Microsoft Project. From excavation to finishing work schedule should be generated in the Microsoft project and notify the critical path. Resource allocation of every work and material should be provided. The cost of the work and material should be calculated in the M.S project. From this thesis, the positive outcome of the planning and scheduling should specify. This thesis is actually researching and notifying the proper planning and secluding for the management of the project with Microsoft project and it will notify the duration, deadline, cost, and material.

Published by: Aldrin

Author: Aldrin

Paper ID: V7I2-1371

Paper Status: published

Published: April 15, 2021

Full Details
Research Paper

Detection and Prevention of Black hole attack by Grey Wolf Optimization in Wireless Sensor Network

Wireless sensor network is a group of nodes that are connected to each other by wireless connection. These types of network work on the dynamic topology of the network because positions of nodes in the wireless network are changing continuously. The nodes in WSN are basically made up of small electronics device which are used for sensing, computing and transmitting the data. The nodes are run on the battery power during communication process. The battery consumption in WSN is very high due to high computation operations on it. In the recent years WSN grows at very high at the research area is also increased in this field to provide effective computation. major concern for maintaining the security of the system greatly depends upon the limited energy of the sensor nodes. Thus the communication and the computational measures for the measure of security should be kept small. Dealing with the issues related to security, the limited form of energy provides a challenging path with an additional set target research work done on the wireless sensor network by using the concept of leach routing of nodes and optimize the routing process by using the Grey Wolf Optimization algorithm. The GWO algorithm provides the optimal results. The optimal result provided by GWO reduced the time delay, dead nodes, and energy consumption and improve the network quality.

Published by: Nasir Hussain Mir, Dr. Rajat Joshi

Author: Nasir Hussain Mir

Paper ID: V7I2-1364

Paper Status: published

Published: April 14, 2021

Full Details
Research Paper

Improved vehicle number plate detection with bounded segmentation and random forest

Automatic Number Plate Recognition System is the identification system of vehicles. It is an image processing technology used to identify the vehicles only by their license plates. Automatic Number Plate Recognition ANPR plays am major role in management of parking areas, and surveillance of illegally parked vehicles. Since every vehicle has a unique number plate so it can be identified by its number plate. The classification is utilized for the electronic toll-collection system (ETC) and to display available parking spaces to vehicles. The identification is also employed for managing parking facilities, monitoring and analysis of traveling time, and security systems such as observation of stolen vehicles and monitoring of unauthorized vehicles entering private areas. Number plate recognition is realized by acquiring images of either the front or the rear of vehicles with cameras and then by image processing to identify license plates. In this paper proposed approach extract texture features and optimize by WCA then classified by Random forest.

Published by: Shahid Yousuf, Dr. Rajat Joshi

Author: Shahid Yousuf

Paper ID: V7I2-1363

Paper Status: published

Published: April 14, 2021

Full Details
Request a Call
If someone in your research area is available then we will connect you both or our counsellor will get in touch with you.

    [honeypot honeypot-378]

    X
    Journal's Support Form
    For any query, please fill up the short form below. Try to explain your query in detail so that our counsellor can guide you. All fields are mandatory.

      X
       Enquiry Form
      Contact Board Member

        Member Name

        [honeypot honeypot-527]

        X
        Contact Editorial Board

          X

            [honeypot honeypot-310]

            X