Manuscripts

Recent Papers

Others

Management of immature nonvital tooth with single-step apexification with MTA: A case report

Apexification is a procedure for the closure of the open apex in an immature necrotic tooth. Apexification with calcium hydroxide is considered the gold standard. However, this technique is associated with certain difficulties such as multiple visits, the possibility of tooth fracture, and incomplete calcification of the bridge, poor quality bridge. Single-visit mineral trioxide aggregate (MTA) apexification has become popular over the calcium hydroxide technique. In this article, a case report, which was treated by the single visit apexification procedure with MTA as the apical plug and the rest of the canal was obturated with thermoplastisized gutta-percha technique

Published by: Dr. M. B. Wavdhane, Dr. Pradnya V. Bansode, Dr. Seema D. Pathak, Dr. Radhika S. Rathi

Author: Dr. M. B. Wavdhane

Paper ID: V7I3-2232

Paper Status: published

Published: July 1, 2021

Full Details
Research Paper

Sign Language recognition system using Convolutional Neural Networks

Communication is key to share and express ideas and thoughts. And not every person has the natural ability to communicate. Mute people communicate with each other and with rest of the people through sign language. Sign language is the way of communication using gestures with hands where each gesture corresponds to particular letter in an alphabet or a word. But to use this every person must have the knowledge of it. But in the real world, it is not the case. With the advancement in the field of deep learning it is possible to solve this problem with low cost. So, this project aims at making it easier for mute people to communicate to the rest of the world. In this project, image of the hand gesture made by the person is captured and is translated to its corresponding meaning in the American sign language system. Equipment such as hand gloves sensor is one of the methods used for sign language detection. But it is expensive and not all of the people in need of it would be able to afford it. A deep learning algorithm called convolutional neural network is used for identifying the gestures and giving the actual letter or word.

Published by: Puramshetty Srinidhi Rao, Potladurthy Sindhu Sri Vatsalya, Ruttala Bhanu Sree Sai, Polavarapu Janshi, Koda Indu

Author: Puramshetty Srinidhi Rao

Paper ID: V7I4-1141

Paper Status: published

Published: July 1, 2021

Full Details
Research Paper

Design waste water treatment plant for township

Wastewater treatment is a process used to remove contaminants from wastewater or sewage and convert it into effluent that can be returned to the water cycle with acceptable impact on the environment, or reused for various purposes (called water reclamation). The treatment process takes place in a wastewater treatment plant (WWTP), also referred to as a Water Resource Recovery Facility (WRRF) or a Sewage Treatment Plant (STP) in the case of domestic wastewater. Pollutants in wastewater are removed, converted, or broken down during the treatment process. Wastewater is any water that has been contaminated by human use. The wastewater is then used water from any combination of domestic, industrial, commercial, or agricultural activities, surface runoff, or stormwater We planning a residential township for 10, 000 populations. In this township, we design a small wastewater treatment plant. In this treatment plant, we design to treat domestic wastewater. In the wastewater treatment plant, we design units of the wastewater treatment plants.

Published by: Aniruddh J. Bambole, Ekta A. Meshram, Saurabh L. Kinnake, Udaykumar B. Guttal, Satyfulesh R. Rangari, Shital Navghare

Author: Aniruddh J. Bambole

Paper ID: V7I3-2235

Paper Status: published

Published: July 1, 2021

Full Details
Research Paper

Solar techniques to offset STP power supply in residential buildings

There are more energy crisis is occurring in India. We are in a situation to produce own renewable energies. Many industrial and commercial sectors have started producing their own renewable energies. Only if the residential sectors start to produce their own energies, we can overcome the energy crisis. Sewage treatment plant is one of most power consuming source in a residential building. Sewage treatment is the process of removing contaminants from wastewater, primarily from household sewage. It includes physical, chemical, and biological processes to remove these contaminants and produce environmentally safe treated wastewater (or treated effluent). The types and the energy consumption are studied in this paper. Also suitable source of energy is given as a solution to offset the power supply of STP in residential buildings.

Published by: Surander Marianandham, Radhika

Author: Surander Marianandham

Paper ID: V7I3-2215

Paper Status: published

Published: July 1, 2021

Full Details
Research Paper

Analysis and applications of transparent wood in existing commercial building reducing electrical load

Electricity is one of the major energy consumption in any commercial building. There are many ways to consume energy. One of the ways is by using building material. The plywood and furniture industry is growing day by day in India for the last few years. The wood is itself made transparent and stronger. The tiny fibers that form the walls of channels are what makes wood so robust. These channels, being the backbone structure of wood. The approach of using transparent wood could slash energy costs by reducing there need for artificial lighting inside buildings. Transparent wood has more strength and better insulating properties than glass and other materials. It also has better biodegradability than ordinary plastic and is shatter-proof as well. This material reduces a building's net energy consumption not only by reducing the need for artificial lighting but also by generating electricity. These results are analyzed by simulating this material in a building. Comparing other materials with these materials is beneficial in many aspects.

Published by: Harshini, V. Vidya Naveen

Author: Harshini

Paper ID: V7I3-2212

Paper Status: published

Published: July 1, 2021

Full Details
Thesis

Design and development of footwear with specific emphasis on thermal comfort using interchangeable upper components

Shoes with interchangeable upper, it is a new concept of shoes that are characterized by their upper are interchangeable which helps them to adapt for every occasion and that is transformed into light footwear and easy to save space during the trips. same size upper and soles are interchangeable. Design and development of interchangeable components of the shoe leather and leather lining combination is measured by using CAD is used to accomplish preliminary design and design details and calculations, creating 3-D models, creating and releasing drawings, as well as interfacing with analysis, manufacturing footwear. This manufacturing of changeable seasonal shoe upper is more comfortable on the human foot and intended to protect while the wearer is doing various activities. Also used as an item of decoration, fashion and footwear customization is simply unzip and re-zip the best style of the seasons easy to clean with good hygiene, separable upper and outsole, preventing smelly of shoes. lots of upper styles to be purchased separately. users purchase not only in pairs but also in ‘parts’ of the shoes, allowing users to reduce the cost of repurchase while extending the lifespan of the footwear by change only the part damaged. footwear customers are simply using unzip and re-zip their comfortable footwear style and users purchase not only in pairs but also in parts of the shoes, allowing users to reduce the cost of repurchase while extending the lifespan of the footwear by change only the part damaged.

Published by: Shimelis Feleke

Author: Shimelis Feleke

Paper ID: V7I3-2211

Paper Status: published

Published: July 1, 2021

Full Details