8,100+ papers published18,500+ authors published44 countriesPublishing since 2014

Manuscripts

Recent Papers

Intelligent Traffic Light Control System using Programmable Logic Controller

The main object of this study was to design and implement intelligent traffic control system using Programmable Logic Controller. This project is divided into two parts which are hardware and software. The system developed is able to sense the presence or absence of vehicles within a certain range by setting the appropriate duration for the traffic signals to react accordingly. The hardware part of this project is a model of four-way junction of a traffic light. By employing mathematical functions to calculate the appropriate timing for the green signal to illuminate, the system can help to solve the problem of traffic congestion. Hardware simulation tests were successfully performed on the algorithm implemented into a PLC (programmable logic controller).

Published by: Vivek Garg, Aishwarya Rai

Author: Vivek Garg

Paper ID: V3I2-1380

Paper Status: rejected

Submitted: April 1, 2017

Full Details Track Status
Research Paper

Purification of Biogas

The following paper describes production of biogas and purification of biogas. We have performed experimentation on biogas production. The raw material used for biogas production are kitchen wastes. The paper describes the Anaerobic digestion process used for biogas production. This paper describes the properties the properties of biogas like colorless odorless, etc. and advantages and disadvantages. Biogas has numerous purposes and also can be as the energy source. Biogas involves different components of gasses like Methane, Carbon Dioxide, Hydrogen Sulphide, and moisture content. Purification biogas means removal of Carbon Dioxide, Hydrogen Sulphide, and moisture content.

Published by: Mohasin A. Shikilkar, Raviraj K. Mane, Shubham U. Mali, Birudev B. Sule, Dipak P. Ombale, Prof. S. M. Huddedar, Prof. R. R. Narkar

Author: Mohasin A. Shikilkar

Paper ID: V3I2-1379

Paper Status: published

Published: April 1, 2017

Full Details

Geopolymer Concrete: An Experimental Investigation of Workability and Compressive Strength of Geopolymer Concrete with PPC

The Romans constructed the Colosseum from a primitive form of concrete. It was made by using concrete using lime, which was burned to create quicklime, water and volcanic ash. The volcanic ash served as the aggregate and is likely the reason Roman concrete, which was 10 times weaker than the concrete used presently, but it lived even after almost 2,000 years. Moreover Pyramids were possibly made of this long lasting material the Pyramids are still in good shape, which demonstrates the excellent durability of geopolymer. This era have witnessed a lot more varieties of construction and concrete. This paper is an exploration of “Geopolymer Concrete” which offers the “greenery” construction as well as to reduce the air pollution and consumption of Cement. The Ordinary Portland Cement (OPC) is most widely used construction material, approximately for every tone of cement production 1 tone of CO2 emitted by cement factory. The Cement production is responsible for approximately 5% emission of Co2 of world. Geopolymer Concrete results from high silica rich material. A research undertaken included study of Geopolymer Concrete mix design, Workability, Compressive and Tensile strength of concrete. A low calcium fly Ash was used with both Sodium silicate solution and Sodium hydroxide solution in mix. Sodium hydroxide solution with 5M, 8 M, 10 M and 12 M concentration, Sodium silicate to sodium hydroxide ratio is 2.0 was used .The ratio of Alkaline liquid to fly ash 0.49, heat curing was adopted at 60 + 5°C for 24 h and room temperature curing at 23 + 2°C.

Published by: Er. Pankaj Kumar Singh, Inderjit Singh

Author: Er. Pankaj Kumar Singh

Paper ID: V3I2-1378

Paper Status: published

Published: March 31, 2017

Full Details

Image Processing For Haze Removal

This paper focuses on implementing image processing for human understanding in low visibility using different image processing technologies, high-speed processors, employing the BBB board in designing embedded systems and protocols with their comparative study. We have proposed a system called as “image processing for human understanding in low visibility”. The purpose of this application is to overcome the problem of Low-visibility conditions for Navigation of vehicles. Driving at night, in blizzards, in sand storms, or in fog form an obvious set of challenging conditions. The main aim is to solve the problem of low visibility by advanced image processing technique purpose to improve the perceptual quality of images that lack the contrast or color depth perceived by the human visual system. This paper provides the use of high-speed infrared cameras and advanced image processing techniques to deal with the problem of low visibility.

Published by: Surabhi Deshpande, Shivali Pande, Saloni Dajjuka, Harshal Baheti

Author: Surabhi Deshpande

Paper ID: V3I2-1376

Paper Status: published

Published: March 31, 2017

Full Details

Multi Spindle Drilling SPM for G91 Engine Hood

The use of SPM increases productivity and maintain the accuracy of drilling operation for a number of times. This paper gives literature survey about multi-spindle drilling machine and focuses on previous development in Multi-spindle drilling machines. Multi-spindle head machines are used in mechanical industry to increase the productivity of machining systems. The multi-spindle drilling machines are production type of machine. It is used to drill two holes in a workpiece simultaneously in one setting. The holes are drilled on a number of workpieces with the same accuracy to make them interchangeable. The overall use of drilling SPM increases productivity rate largely as compared to a use of conventional drilling machines.

Published by: Shreya Dinesh Gurav, Shreyas Katti, Shubham Sanas, Y.G Nadargi, Vitthal Wakchaure

Author: Shreya Dinesh Gurav

Paper ID: V3I2-1375

Paper Status: published

Published: March 31, 2017

Full Details

Design and Fabrication of Pipe Bending and Pipe Rolling Machine

This paper presents the design and fabrication of combined pipe bending and pipe rolling machine. There is no single machine made to perform both rolling and bending operations. Hence we have selected this project to design and fabricate combined bending and rolling of pipe using single power source. The defects occur during bending are too much tedious to eliminate. While designing the machine we tried to minimize defects and minimize the initial cost of the machine. Using this machine both bending and rolling of pipe of outer diameter 19 mm and thickness 1-2 mm is possible with single power source only.

Published by: Rohit Vilas Thorave, Pendse Ashutosh .S, Shriraj Vishwanath Kumthekar, Akash Prashant Patil, Shivam Gurudatta Pawar, Prof. Sharad S Dhende

Author: Rohit Vilas Thorave

Paper ID: V3I2-1373

Paper Status: published

Published: March 30, 2017

Full Details