This paper is published in Volume-4, Issue-3, 2018
Area
Mechanical Engineering
Author
Mallu Bhojappa Mane, Hemant D. Lagdive
Org/Univ
N. B. Navale Sinhgad College of Engineering, Solapur, Maharashtra, India
Pub. Date
15 May, 2018
Paper ID
V4I3-1412
Publisher
Keywords
Wall mounted swing, Cantilever beam, Bending stress, Welded joint

Citationsacebook

IEEE
Mallu Bhojappa Mane, Hemant D. Lagdive. Design of frame for a wall mounted indoor swing, International Journal of Advance Research, Ideas and Innovations in Technology, www.IJARIIT.com.

APA
Mallu Bhojappa Mane, Hemant D. Lagdive (2018). Design of frame for a wall mounted indoor swing. International Journal of Advance Research, Ideas and Innovations in Technology, 4(3) www.IJARIIT.com.

MLA
Mallu Bhojappa Mane, Hemant D. Lagdive. "Design of frame for a wall mounted indoor swing." International Journal of Advance Research, Ideas and Innovations in Technology 4.3 (2018). www.IJARIIT.com.

Abstract

All The back and forth motion of the swing is good for children under the age of five years as it teaches them how to get along with others. But nowadays, due to the shortage of time & also rush at the gardens, children are not able to play swings. Some indoor swings are available but they are having some drawbacks. This paper presents the design of a frame of a wall mounted swing. It consists of a cantilever beam, two support members, and other parts. The cantilever beam is designed considering the bending stresses developed in it. This beam will be used for hanging the chains of swing. The deflection of the beam in the horizontal plane during swinging action is restricted by two supporting members on each side of the beam. All welded joints in this frame are also designed.