This paper is published in Volume-7, Issue-3, 2021
Area
Electronics and Communication
Author
Arya A. V., Sneha S. Christopher, Ashik Muhammed, Elza Elezabeth Joseph, Nurul Hidaya
Org/Univ
Marian Engineering College, Trivandrum, Kerala, India
Pub. Date
31 May, 2021
Paper ID
V7I3-1564
Publisher
Keywords
Covid -19, Spo2, Wi-Fi, Health Monitoring System

Citationsacebook

IEEE
Arya A. V., Sneha S. Christopher, Ashik Muhammed, Elza Elezabeth Joseph, Nurul Hidaya. Wireless health monitoring and hospital accessing system, International Journal of Advance Research, Ideas and Innovations in Technology, www.IJARIIT.com.

APA
Arya A. V., Sneha S. Christopher, Ashik Muhammed, Elza Elezabeth Joseph, Nurul Hidaya (2021). Wireless health monitoring and hospital accessing system. International Journal of Advance Research, Ideas and Innovations in Technology, 7(3) www.IJARIIT.com.

MLA
Arya A. V., Sneha S. Christopher, Ashik Muhammed, Elza Elezabeth Joseph, Nurul Hidaya. "Wireless health monitoring and hospital accessing system." International Journal of Advance Research, Ideas and Innovations in Technology 7.3 (2021). www.IJARIIT.com.

Abstract

The COVID-19 epidemiological situation and death counts are breaking daily records. New cases are reporting everywhere and hence a situation of examining health of an affected emerges. But most of the people (especially elders) are afraid of being affected if they are approaching a health centre (or hospitals) and so back up with the decision. In addition to this, those who are suffering with severe respiratory issues are to be monitored continuously. In this project, a prototype of wireless health monitoring system capable of sending information related to the health status of the patient is developed. The project can be divided into two stages of data acquisition & processing, and Communication stages. Data acquisition & processing stage consists of sensors and microcontroller. Sensors monitor temperature, BP, SPO2 etc of the patient. The output of sensors are converted to digital form and processed by the microcontroller. The details are viewed by the patient on the display and at the same time by the software user who is linked with the microcontroller WiFi. Critical value of the measured data can be set. When they exceeds threshold, it will alert the whole system. Once abnormalities are detected, the system transmits the information to the hospital database.