This paper is published in Volume-5, Issue-1, 2019
Area
Polymeric Coating
Author
Swapail Shrirame
Co-authors
Pradeep G. Shende
Org/Univ
Laximinarayan Institute of Technology, Nagpur, Maharashtra, India
Pub. Date
16 January, 2019
Paper ID
V5I1-1137
Publisher
Keywords
Castor Oil. Resin. Air Drying. Surface Coating

Citationsacebook

IEEE
Swapail Shrirame, Pradeep G. Shende. Preparation of polyurethane coating based on polyesteramide polyol of castor oil of fatty acid and isocyanate, International Journal of Advance Research, Ideas and Innovations in Technology, www.IJARIIT.com.

APA
Swapail Shrirame, Pradeep G. Shende (2019). Preparation of polyurethane coating based on polyesteramide polyol of castor oil of fatty acid and isocyanate. International Journal of Advance Research, Ideas and Innovations in Technology, 5(1) www.IJARIIT.com.

MLA
Swapail Shrirame, Pradeep G. Shende. "Preparation of polyurethane coating based on polyesteramide polyol of castor oil of fatty acid and isocyanate." International Journal of Advance Research, Ideas and Innovations in Technology 5.1 (2019). www.IJARIIT.com.

Abstract

Polyurethane networks based on polyesteramide polyol using castor oil and diethanolamide (DEA) were proposed to study doing this wide. To utilize oil in the preparation of polyesteramide polyol (PEA). The chemical structure of the synthesized resin was characterized by spectroscopic techniques like FTIR, NMR etc. Various physical properties such as acid value, saponification value, iodine value, hydroxyl value, the amine value of resin were also determined. CO was then converted into diethanolamide castor oil of mixed fatty acid using 0.5 % sodium methoxide as a catalyst and converted to polyesteramide resin after with various dibasic acid in presence of xylene as azeotropic solvent. PU themselves were prepared from the reaction of polyester amide polyol of castor oil (PEA) and isocyanate-terminated polyurethane prepolymer. The PU coating obtained was then analyzed for its physical-chemical, film performance properties and resistance to the various chemical.