The paper presents the Hallmark of Fabrication parameters and their intensive impact of current, voltage, and speed on Ultimate Tensile Strength (UTS) of SS 304 steel material During Fabrication. A plan of experiments based on the Taguchi technique Method has been carried out. Orthogonal array, signal to noise (S/N) Ratio, Analysis of variance (ANOVA) are employed for studying the welding characteristics of material & to optimize the weld parameters. The result obtained is the output from each parameter, through which optimal parameters are found out for maximum tensile strength. Observation-welding current and welding speed are major parameters has a deep impact on the tensile strength of welded joint