This paper is published in Volume-4, Issue-3, 2018
Area
Antenna
Author
Dr. Prakash Kuravatti
Org/Univ
ATME College of Engineering, Mysore, Karnataka, India
Pub. Date
13 June, 2018
Paper ID
V4I3-1758
Publisher
IJARIIT
Edition
Volume-4, Issue-3, 2018
Keywords
Microstrip, Rectangular patch

Citationsacebook

IEEE
Dr. Prakash Kuravatti. Modeling and design of single rectangular patch antenna with edge feed, International Journal of Advance Research, Ideas and Innovations in Technology, www.IJARIIT.com.

APA
Dr. Prakash Kuravatti (2018). Modeling and design of single rectangular patch antenna with edge feed. International Journal of Advance Research, Ideas and Innovations in Technology, 4(3) www.IJARIIT.com.

MLA
Dr. Prakash Kuravatti. "Modeling and design of single rectangular patch antenna with edge feed." International Journal of Advance Research, Ideas and Innovations in Technology 4.3 (2018). www.IJARIIT.com.

Give proper credits, use Citation.

Abstract

A microstrip antenna consists of a dielectric substrate sandwiched between two conducting surfaces, the antenna plane, and the ground plane. The simplified design of the rectangular microstrip patch antenna with edge feed. For this study, the dielectric constant of the dielectric substrate chosen is of height and the loss tangent tanδ= 0.0019. The patch dimensions are dependent on the desired frequency for which the antenna has to be designed. The patch dimensions for the desired frequency are obtained by the transmission model analysis, after the construction of the model of the patch antenna the boundary conditions and the excitations has to be assigned. The patch and the ground plane are perfect electric conductors, so they are assigned as the Perfect E conductors. And the box between the patch and the ground plane is assigned the material with the specified dielectric constant

All content is copyright protected.