This paper is published in Volume-5, Issue-5, 2019
Area
Six Sigma
Author
V. Chaithanya Raam
Co-authors
M. S. Amrish, S. Naveen Kumar, R. Jayashruthi, Arul V.
Org/Univ
Meenakshi Sundararajan Engineering College, Chennai, Tamil Nadu, India
Pub. Date
19 September, 2019
Paper ID
V5I5-1176
Publisher
Keywords
MSA: Measurement System, Vernier Caliper, GRR: Gauge Repeatability and Reproducibility, Minitab, Quality Control, Measurement Reliability

Citationsacebook

IEEE
V. Chaithanya Raam, M. S. Amrish, S. Naveen Kumar, R. Jayashruthi, Arul V.. Gauge repeatability and reproducability study in a mechanical workshop, International Journal of Advance Research, Ideas and Innovations in Technology, www.IJARIIT.com.

APA
V. Chaithanya Raam, M. S. Amrish, S. Naveen Kumar, R. Jayashruthi, Arul V. (2019). Gauge repeatability and reproducability study in a mechanical workshop. International Journal of Advance Research, Ideas and Innovations in Technology, 5(5) www.IJARIIT.com.

MLA
V. Chaithanya Raam, M. S. Amrish, S. Naveen Kumar, R. Jayashruthi, Arul V.. "Gauge repeatability and reproducability study in a mechanical workshop." International Journal of Advance Research, Ideas and Innovations in Technology 5.5 (2019). www.IJARIIT.com.

Abstract

Organizational success depends upon the reliable measurement system that is being used in the organization and also the workers' efficiency in measuring the object. Gauge repeatability and reproducibility (GRR) study is used to assess the measurement system and the workers' efficiency in measuring the instruments. This paper demonstrates the application of GRR study in a Mechanical workshop, where measurement (External diameter) of 5 different objects is measured with the measuring instrument (Vernier Caliper) by 3 different operators. Using Minitab, the GRR study is done. Finally, the findings of the study are stated in the conclusion.
Paper PDF