This paper is published in Volume-3, Issue-2, 2017
Area
Design
Author
Siva Siddharth I. S, Sathish Kumar B. S, Selvaganapathy .M, Kumaresan .G
Org/Univ
Bannari Amman Institute of Technology, Sathyamangalam, Tamil Nadu, India
Pub. Date
07 March, 2017
Paper ID
V3I2-1152
Publisher
Keywords
Solar Panel, Battery, Rain Sensor, Pulley.

Citationsacebook

IEEE
Siva Siddharth I. S, Sathish Kumar B. S, Selvaganapathy .M, Kumaresan .G. Design and Experimental Study on Automatic Cloth Retrieval and Drying System, International Journal of Advance Research, Ideas and Innovations in Technology, www.IJARIIT.com.

APA
Siva Siddharth I. S, Sathish Kumar B. S, Selvaganapathy .M, Kumaresan .G (2017). Design and Experimental Study on Automatic Cloth Retrieval and Drying System. International Journal of Advance Research, Ideas and Innovations in Technology, 3(2) www.IJARIIT.com.

MLA
Siva Siddharth I. S, Sathish Kumar B. S, Selvaganapathy .M, Kumaresan .G. "Design and Experimental Study on Automatic Cloth Retrieval and Drying System." International Journal of Advance Research, Ideas and Innovations in Technology 3.2 (2017). www.IJARIIT.com.

Abstract

For a working couple, it is hard to find time to have laundry day where the cloth is dried through the whole day because the weather can change from sunny to rainy days. These projects use Microcontroller PIC 16F877 to install all program that will give instructions to conduct this system properly. This project will automatically retrieve out the clothes when it is the sunny day and oppositely retrieve in the clothes when it is a rainy day. This part needs DC motor to convert electrical power into mechanical power for retrieve-out and retrieve in all the clothes. Temperature sensors that will be used in this project can measure temperature and day condition whether it is the sunny or rainy day more accurately. LDR (Light Dependent Resistor) sensors will be used to detect light. Rain detector also will be used to sense when it begins to rain outside by detecting rain water from moisture impedance sensor locate at the road. The dry-time of the clothes will be setup using rotary knob switch and it will automatically retrieve in the clothes using DC motor when the dried-time is finished. This project will display the day condition, temperature, and dry-timer using LCD (Liquid Crystal Display) or indicator light such as LED (Light Emitting Diode).
Paper PDF