This paper is published in Volume-5, Issue-1, 2019
Area
Structural Engineering
Author
Siddhitee N. Sabnis, Mohd. Shahezad
Org/Univ
Prof. Ram Meghe Institute of Technology and Research, Amravati, Maharashtra, India
Pub. Date
07 January, 2019
Paper ID
V5I1-1140
Publisher
Keywords
IS800:2007(LSM) Limit State Method, IS875:1987 Part (I, II and III), AISC LRFD (Load and Resistance Factor Design), Industrial building, STADD-PRO V8i software

Citationsacebook

IEEE
Siddhitee N. Sabnis, Mohd. Shahezad. Comparative study of different codes on steel building, International Journal of Advance Research, Ideas and Innovations in Technology, www.IJARIIT.com.

APA
Siddhitee N. Sabnis, Mohd. Shahezad (2019). Comparative study of different codes on steel building. International Journal of Advance Research, Ideas and Innovations in Technology, 5(1) www.IJARIIT.com.

MLA
Siddhitee N. Sabnis, Mohd. Shahezad. "Comparative study of different codes on steel building." International Journal of Advance Research, Ideas and Innovations in Technology 5.1 (2019). www.IJARIIT.com.

Abstract

The paper mainly focuses on the comparison of two different code that is IS code is IS800: 2007 (LSM), IS 875: 1987 part (I, II, and III) and AISC LRFD code for a conventional industrial steel building. It’s a case study for the industrial building based on the review and the various case studies which show their experimental and analytical study carried out in this field. Different structural design code provides different data and procedure of design to engineering. Comparisons of the different factor with the same loading. To conduct the study a 3D model of Industrial building having dimension 15mX45m, 20mX50m, 23mX65mwith three different spacing that is (4.5m,5m,6m); (5m,6m,7m); (5m,6m,7m) having column height 6m is designed and analyzed on STADD-Pro V8i structural design software.