This paper is published in Volume-7, Issue-2, 2021
Area
Mechanical Engineering
Author
Atharva Mahindrakar, Atul Kulkarni
Org/Univ
Vishwakarma Institute of Information Technology, Pune, Maharashtra, India
Pub. Date
19 April, 2021
Paper ID
V7I2-1418
Publisher
Keywords
Finite Element Analysis, Meshing Size, Ansys Workbench 2020 R1, Solidworks, Ventilated Disc Brake, Drilled Disc Brake

Citationsacebook

IEEE
Atharva Mahindrakar, Atul Kulkarni. Thermal analysis of ventilated and drilled disc brake, International Journal of Advance Research, Ideas and Innovations in Technology, www.IJARIIT.com.

APA
Atharva Mahindrakar, Atul Kulkarni (2021). Thermal analysis of ventilated and drilled disc brake. International Journal of Advance Research, Ideas and Innovations in Technology, 7(2) www.IJARIIT.com.

MLA
Atharva Mahindrakar, Atul Kulkarni. "Thermal analysis of ventilated and drilled disc brake." International Journal of Advance Research, Ideas and Innovations in Technology 7.2 (2021). www.IJARIIT.com.

Abstract

In the recent automotive industry, a braking system is considered to be very important in terms of the safety of the driver. FEA is a basic simulation of a physical component and is used for performing mechanical analysis. FEA is very essential before the production of any component of a vehicle. In this paper, a ventilated and drilled type of disc brake is taken as the component which has been thermally analyzed. This thermal analysis is done with the use of Ansys Workbench 2020 R1 and the component is modeled using the SolidWorks software. In this paper, a brief idea about the effect of different meshing sizes as well as the type of meshing using finite element analysis is considered and consequently, the thermal analysis of the same has been calculated. The results obtained illustrate the effect of the difference in mesh size and the type and how it plays an important role in the analysis of any component.